Note: Up to 64 characters are allowed before and 255 characters are allowed after the @ sign. However, the generally accepted maximum length for an email address is 254 characters. The pattern verifies that an unquoted @ sign exists.

Match^.*(?:[a-zA-Z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-zA-Z0-9!#$%&'*+/=?^_`{|}~-]+)*|(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21\x23-\x5b\x5d-\x7f]|\[\x01-\x09\x0b\x0c\x0e-\x7f])*")@(?:(?:[a-zA-Z0-9](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?\.)+[a-zA-Z0-9](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?|\[(?:(?:(2(5[0-5]|[0-4][0-9])|1[0-9][0-9]|[1-9]?[0-9]))\.){3}(?:(2(5[0-5]|[0-4][0-9])|1[0-9][0-9]|[1-9]?[0-9])|[a-zA-Z0-9-]*[a-zA-Z0-9]:(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21-\x5a\x53-\x7f]|\[\x01-\x09\x0b\x0c\x0e-\x7f])+)\]).*$Length3 <= length <= 254

phoneobject<phone_with_type>Optional

The phone information.

phone_with_type properties

2 properties

phone_typeenum<phone_type>Optional

The phone type.

Allowed values

"FAX"
"HOME"
"MOBILE"
"OTHER"
"PAGER"

phone_numberobject<phone>Required

The phone number, in its canonical international [E.164 numbering plan format](https://www.itu.int/rec/T-REC-E.164/en).

phone properties

3 properties

country_codestring<country_calling_code>Required

The country calling code (CC), in its canonical international [E.164 numbering plan format](https://www.itu.int/rec/T-REC-E.164/en). The combined length of the CC and the national number must not be greater than 15 digits. The national number consists of a national destination code (NDC) and subscriber number (SN).

Match^[0-9]{1,3}?$Length1 <= length <= 3

national_numberstringRequired

The national number, in its canonical international [E.164 numbering plan format](https://www.itu.int/rec/T-REC-E.164/en). The combined length of the country calling code (CC) and the national number must not be greater than 15 digits. The national number consists of a national destination code (NDC) and subscriber number (SN).

Match^[0-9]{1,14}?$Length1 <= length <= 14

extension_numberstringOptional

The extension number.

Match^[0-9]{1,15}?$Length1 <= length <= 15

nameobject<name>Optional

The name of the party.

name properties

6 properties

prefixstringOptional

The prefix, or title, to the party's name.

Match^[\S\s]*$Length0 <= length <= 140

given_namestringOptional

When the party is a person, the party's given, or first, name.

Match^[\S\s]*$Length0 <= length <= 140

surnamestringOptional

When the party is a person, the party's surname or family name. Also known as the last name. Required when the party is a person. Use also to store multiple surnames including the matronymic, or mother's, surname.

Match^[\S\s]*$Length0 <= length <= 140

middle_namestringOptional

When the party is a person, the party's middle name. Use also to store multiple middle names including the patronymic, or father's, middle name.

Match^[\S\s]*$Length0 <= length <= 140

suffixstringOptional

The suffix for the party's name.

Match^[\S\s]*$Length0 <= length <= 140

full_namestringOptional

When the party is a person, the party's full name.

Match^[\S\s]*$Length0 <= length <= 300

merchant_customer_idstringOptional

Merchants and partners may already have a data-store where their customer information is persisted. Use merchant_customer_id to associate the PayPal-generated customer.id to your representation of a customer.

Match^[0-9a-zA-Z-_.^*$@#]+$Length1 <= length <= 64

vaultobject<vault_paypal_wallet_base>Optional

Resource consolidating common request and response attributes for vaulting PayPal Wallet.

vault_paypal_wallet_base properties

7 properties

store_in_vaultenum<store_in_vault_instruction>Optional

Defines how and when the payment source gets vaulted.

Allowed values

"ON_SUCCESS"

descriptionstringOptional

The description displayed to PayPal consumer on the approval flow for PayPal, as well as on the PayPal payment token management experience on PayPal.com.

Match^[\S\s]*$Length1 <= length <= 128

usage_patternenumOptional

Expected business/pricing model for the billing agreement.

Allowed values

"IMMEDIATE"
"DEFERRED"
"RECURRING_PREPAID"
"RECURRING_POSTPAID"
"THRESHOLD_PREPAID"
"THRESHOLD_POSTPAID"
"SUBSCRIPTION_PREPAID"
"SUBSCRIPTION_POSTPAID"
"UNSCHEDULED_PREPAID"
"UNSCHEDULED_POSTPAID"
"INSTALLMENT_PREPAID"
"INSTALLMENT_POSTPAID"

shippingobject<shipping_detail>Optional

The shipping details.

shipping_detail properties

6 properties

nameobject<name>Optional

The name of the party.

name properties

6 properties

prefixstringOptional

The prefix, or title, to the party's name.

Match^[\S\s]*$Length0 <= length <= 140

given_namestringOptional

When the party is a person, the party's given, or first, name.

Match^[\S\s]*$Length0 <= length <= 140

surnamestringOptional

Match^[\S\s]*$Length0 <= length <= 140

middle_namestringOptional

When the party is a person, the party's middle name. Use also to store multiple middle names including the patronymic, or father's, middle name.

Match^[\S\s]*$Length0 <= length <= 140

suffixstringOptional

The suffix for the party's name.

Match^[\S\s]*$Length0 <= length <= 140

full_namestringOptional

When the party is a person, the party's full name.

Match^[\S\s]*$Length0 <= length <= 300

email_addressstring<email_address>Optional

The internationalized email address.

Note: Up to 64 characters are allowed before and 255 characters are allowed after the @ sign. However, the generally accepted maximum length for an email address is 254 characters. The pattern verifies that an unquoted @ sign exists.

Match^(?:[A-Za-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[A-Za-z0-9!#$%&'*+/=?^_`{|}~-]+)*|"(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21\x23-\x5b\x5d-\x7f]|\\[\x01-\x09\x0b\x0c\x0e-\x7f])*")@(?:(?:[A-Za-z0-9](?:[A-Za-z0-9-]*[A-Za-z0-9])?\.)+[A-Za-z0-9](?:[A-Za-z0-9-]*[A-Za-z0-9])?|\[(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?|[A-Za-z0-9-]*[A-Za-z0-9]:(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21-\x5a\x53-\x7f]|\\[\x01-\x09\x0b\x0c\x0e-\x7f])+)\])$Length3 <= length <= 254

phone_numberobject<phone>Optional

The phone number, in its canonical international [E.164 numbering plan format](https://www.itu.int/rec/T-REC-E.164/en).

phone properties

3 properties

country_codestring<country_calling_code>Required

Match^[0-9]{1,3}?$Length1 <= length <= 3

national_numberstringRequired

Match^[0-9]{1,14}?$Length1 <= length <= 14

extension_numberstringOptional

The extension number.

Match^[0-9]{1,15}?$Length1 <= length <= 15

typeenumOptional

A classification for the method of purchase fulfillment (e.g shipping, in-store pickup, etc). Either `type` or `options` may be present, but not both.

Allowed values

"SHIPPING"Default
"PICKUP_IN_PERSON"
"PICKUP_IN_STORE"
"PICKUP_FROM_PERSON"

optionsobject<shipping_option>[]Optional

An array of shipping options that the payee or merchant offers to the payer to ship or pick up their items.

Items0 <= length <= 30

shipping_option properties

5 properties

idstringRequired

A unique ID that identifies a payer-selected shipping option.

Match^[\S\s]*$Length0 <= length <= 127

labelstringRequired

A description that the payer sees, which helps them choose an appropriate shipping option. For example, `Free Shipping`, `USPS Priority Shipping`, `Expédition prioritaire USPS`, or `USPS yōuxiān fā huò`. Localize this description to the payer's locale.

Match^[\S\s]*$Length0 <= length <= 127

typeenum<shipping_type>Optional

A classification for the method of purchase fulfillment.

Allowed values

"SHIPPING"Default
"PICKUP"
"PICKUP_IN_STORE"
"PICKUP_FROM_PERSON"

amountobject<money>Optional

The currency and amount for a financial transaction, such as a balance or payment due.

money properties

2 properties

currency_codestring<currency_code>Required

The [three-character ISO-4217 currency code](/api/rest/reference/currency-codes/) that identifies the currency.

Match^[\S\s]*$Length3 <= length <= 3

valuestringRequired

The value, which might be:

An integer for currencies like `JPY` that are not typically fractional.
A decimal fraction for currencies like `TND` that are subdivided into thousandths.

For the required number of decimal places for a currency code, see [Currency Codes](/api/rest/reference/currency-codes/).

Match^((-?[0-9]+)|(-?([0-9]+)?[.][0-9]+))$Length0 <= length <= 32

selectedbooleanRequired

If the API request sets `selected = true`, it represents the shipping option that the payee or merchant expects to be pre-selected for the payer when they first view the `shipping.options` in the PayPal Checkout experience. As part of the response if a `shipping.option` contains `selected=true`, it represents the shipping option that the payer selected during the course of checkout with PayPal. Only one `shipping.option` can be set to `selected=true`.

addressobject<address_portable>Optional

The portable international postal address. Maps to [AddressValidationMetadata](https://github.com/googlei18n/libaddressinput/wiki/AddressValidationMetadata) and HTML 5.1 [Autofilling form controls: the autocomplete attribute](https://www.w3.org/TR/html51/sec-forms.html#autofilling-form-controls-the-autocomplete-attribute).

address_portable properties

10 properties

address_line_1stringOptional

The first line of the address, such as number and street, for example, `173 Drury Lane`. Needed for data entry, and Compliance and Risk checks. This field needs to pass the full address.

Match^[\S\s]*$Length0 <= length <= 300

address_line_2stringOptional

The second line of the address, for example, a suite or apartment number.

Match^[\S\s]*$Length0 <= length <= 300

address_line_3stringOptional

The third line of the address, if needed. Examples include a street complement for Brazil, direction text, such as `next to Walmart`, or a landmark in an Indian address.

Match^[\S\s]*$Length0 <= length <= 100

admin_area_4stringOptional

The neighborhood, ward, or district. This is smaller than `admin_area_level_3` or `sub_locality`. Value is:

The postal sorting code that is used in Guernsey and many French territories, such as French Guiana.
The fine-grained administrative levels in China.

Match^[\S\s]*$Length0 <= length <= 100

admin_area_3stringOptional

The sub-locality, suburb, neighborhood, or district. This is smaller than `admin_area_level_2`. Value is:

Brazil. Suburb, *bairro*, or neighborhood.
India. Sub-locality or district. Street name information isn't always available, but a sub-locality or district can be a very small area.

Match^[\S\s]*$Length0 <= length <= 100

admin_area_2stringOptional

A city, town, or village. Smaller than `admin_area_level_1`.

Match^[\S\s]*$Length0 <= length <= 120

admin_area_1stringOptional

The highest-level sub-division in a country, which is usually a province, state, or ISO-3166-2 subdivision. This data is formatted for postal delivery, for example, `CA` and not `California`. Value, by country, is:

UK. A county.
US. A state.
Canada. A province.
Japan. A prefecture.
Switzerland. A *kanton*.

Match^[\S\s]*$Length0 <= length <= 300

postal_codestringOptional

The postal code, which is the ZIP code or equivalent. Typically required for countries with a postal code or an equivalent. See [postal code](https://en.wikipedia.org/wiki/Postal_code).

Match^[\S\s]*$Length0 <= length <= 60

country_codestring<country_code>Required

The [2-character ISO 3166-1 code](/api/rest/reference/country-codes/) that identifies the country or region.

Note: The country code for Great Britain is GB and not UK as used in the top-level domain names for that country. Use the `C2` country code for China worldwide for comparable uncontrolled price (CUP) method, bank card, and cross-border transactions.

Match^([A-Z]{2}|C2)$Length2 <= length <= 2

address_detailsobject<Address Details>Optional

The non-portable additional address details include fine-grain address information for Compliance, Risk, and other scenarios. This isn't portable with common third-party and open source applications. This can include data that is redundant with core fields. For example, `address_portable.address_line_1` is usually a combination of `address_details.street_number`, `street_name`, and `street_type`.

Address Details properties

6 properties

street_numberstringOptional

The street number.

Match^[\S\s]*$Length0 <= length <= 100

street_namestringOptional

The street name. Just `Drury` in `Drury Lane`.

Match^[\S\s]*$Length0 <= length <= 100

street_typestringOptional

The street type. For example, avenue, boulevard, road, or expressway.

Match^[\S\s]*$Length0 <= length <= 100

delivery_servicestringOptional

The delivery service. Post office box, bag number, or post office name.

Match^[\S\s]*$Length0 <= length <= 100

building_namestringOptional

A named locations that represents the premise. Usually a building name or number or collection of buildings with a common name or number. For example, Craven House.

Match^[\S\s]*$Length0 <= length <= 100

sub_buildingstringOptional

The first-order entity below a named building or location that represents the sub-premise. Usually a single building within a collection of buildings with a common name. Can be a flat, story, floor, room, or apartment.

Match^[\S\s]*$Length0 <= length <= 100

usage_typeenumRequired

The usage type associated with the PayPal payment token.

Allowed values

"MERCHANT"
"PLATFORM"

customer_typeenumOptional

The customer type associated with the PayPal payment token. This is to indicate whether the customer acting on the merchant / platform is either a business or a consumer.

Allowed values

"CONSUMER"Default
"BUSINESS"

permit_multiple_payment_tokensbooleanOptional

Create multiple payment tokens for the same payer, merchant/platform combination. Use this when the customer has not logged in at merchant/platform. The payment token thus generated, can then also be used to create the customer account at merchant/platform. Use this also when multiple payment tokens are required for the same payer, different customer at merchant/platform. This helps to identify customers distinctly even though they may share the same PayPal account. This only applies to PayPal payment source.

Defaultfalse

Back to top

paypal_wallet_attributes

Additional attributes associated with the use of this PayPal Wallet.

customerobject<paypal_wallet_customer>Optional

The details about a customer in PayPal's system of record.

paypal_wallet_customer properties

5 properties

idstring<merchant_partner_customer_id>Optional

The unique ID for a customer generated by PayPal.

Match^[0-9a-zA-Z_-]+$Length1 <= length <= 22

email_addressstring<email>Optional

The internationalized email address.

Note: Up to 64 characters are allowed before and 255 characters are allowed after the @ sign. However, the generally accepted maximum length for an email address is 254 characters. The pattern verifies that an unquoted @ sign exists.

phoneobject<phone_with_type>Optional

The phone information.

phone_with_type properties

2 properties

phone_typeenum<phone_type>Optional

The phone type.

Allowed values

"FAX"
"HOME"
"MOBILE"
"OTHER"
"PAGER"

phone_numberobject<phone>Required

The phone number, in its canonical international [E.164 numbering plan format](https://www.itu.int/rec/T-REC-E.164/en).

phone properties

3 properties

country_codestring<country_calling_code>Required

Match^[0-9]{1,3}?$Length1 <= length <= 3

national_numberstringRequired

Match^[0-9]{1,14}?$Length1 <= length <= 14

extension_numberstringOptional

The extension number.

Match^[0-9]{1,15}?$Length1 <= length <= 15

nameobject<name>Optional

The name of the party.

name properties

6 properties

prefixstringOptional

The prefix, or title, to the party's name.

Match^[\S\s]*$Length0 <= length <= 140

given_namestringOptional

When the party is a person, the party's given, or first, name.

Match^[\S\s]*$Length0 <= length <= 140

surnamestringOptional

Match^[\S\s]*$Length0 <= length <= 140

middle_namestringOptional

When the party is a person, the party's middle name. Use also to store multiple middle names including the patronymic, or father's, middle name.

Match^[\S\s]*$Length0 <= length <= 140

suffixstringOptional

The suffix for the party's name.

Match^[\S\s]*$Length0 <= length <= 140

full_namestringOptional

When the party is a person, the party's full name.

Match^[\S\s]*$Length0 <= length <= 300

merchant_customer_idstringOptional

Match^[0-9a-zA-Z-_.^*$@#]+$Length1 <= length <= 64

vaultobject<vault_paypal_wallet_base>Optional

Resource consolidating common request and response attributes for vaulting PayPal Wallet.

vault_paypal_wallet_base properties

7 properties

store_in_vaultenum<store_in_vault_instruction>Optional

Defines how and when the payment source gets vaulted.

Allowed values

"ON_SUCCESS"

descriptionstringOptional

The description displayed to PayPal consumer on the approval flow for PayPal, as well as on the PayPal payment token management experience on PayPal.com.

Match^[\S\s]*$Length1 <= length <= 128

usage_patternenumOptional

Expected business/pricing model for the billing agreement.

Allowed values

"IMMEDIATE"
"DEFERRED"
"RECURRING_PREPAID"
"RECURRING_POSTPAID"
"THRESHOLD_PREPAID"
"THRESHOLD_POSTPAID"
"SUBSCRIPTION_PREPAID"
"SUBSCRIPTION_POSTPAID"
"UNSCHEDULED_PREPAID"
"UNSCHEDULED_POSTPAID"
"INSTALLMENT_PREPAID"
"INSTALLMENT_POSTPAID"

shippingobject<shipping_detail>Optional

The shipping details.

shipping_detail properties

6 properties

nameobject<name>Optional

The name of the party.

name properties

6 properties

prefixstringOptional

The prefix, or title, to the party's name.

Match^[\S\s]*$Length0 <= length <= 140

given_namestringOptional

When the party is a person, the party's given, or first, name.

Match^[\S\s]*$Length0 <= length <= 140

surnamestringOptional

Match^[\S\s]*$Length0 <= length <= 140

middle_namestringOptional

When the party is a person, the party's middle name. Use also to store multiple middle names including the patronymic, or father's, middle name.

Match^[\S\s]*$Length0 <= length <= 140

suffixstringOptional

The suffix for the party's name.

Match^[\S\s]*$Length0 <= length <= 140

full_namestringOptional

When the party is a person, the party's full name.

Match^[\S\s]*$Length0 <= length <= 300

email_addressstring<email_address>Optional

The internationalized email address.

Note: Up to 64 characters are allowed before and 255 characters are allowed after the @ sign. However, the generally accepted maximum length for an email address is 254 characters. The pattern verifies that an unquoted @ sign exists.

phone_numberobject<phone>Optional

The phone number, in its canonical international [E.164 numbering plan format](https://www.itu.int/rec/T-REC-E.164/en).

phone properties

3 properties

country_codestring<country_calling_code>Required

Match^[0-9]{1,3}?$Length1 <= length <= 3

national_numberstringRequired

Match^[0-9]{1,14}?$Length1 <= length <= 14

extension_numberstringOptional

The extension number.

Match^[0-9]{1,15}?$Length1 <= length <= 15

typeenumOptional

A classification for the method of purchase fulfillment (e.g shipping, in-store pickup, etc). Either `type` or `options` may be present, but not both.

Allowed values

"SHIPPING"Default
"PICKUP_IN_PERSON"
"PICKUP_IN_STORE"
"PICKUP_FROM_PERSON"

optionsobject<shipping_option>[]Optional

An array of shipping options that the payee or merchant offers to the payer to ship or pick up their items.

Items0 <= length <= 30

shipping_option properties

5 properties

idstringRequired

A unique ID that identifies a payer-selected shipping option.

Match^[\S\s]*$Length0 <= length <= 127

labelstringRequired

Match^[\S\s]*$Length0 <= length <= 127

typeenum<shipping_type>Optional

A classification for the method of purchase fulfillment.

Allowed values

"SHIPPING"Default
"PICKUP"
"PICKUP_IN_STORE"
"PICKUP_FROM_PERSON"

amountobject<money>Optional

The currency and amount for a financial transaction, such as a balance or payment due.

money properties

2 properties

currency_codestring<currency_code>Required

The [three-character ISO-4217 currency code](/api/rest/reference/currency-codes/) that identifies the currency.

Match^[\S\s]*$Length3 <= length <= 3

valuestringRequired

The value, which might be:

An integer for currencies like `JPY` that are not typically fractional.
A decimal fraction for currencies like `TND` that are subdivided into thousandths.

For the required number of decimal places for a currency code, see [Currency Codes](/api/rest/reference/currency-codes/).

Match^((-?[0-9]+)|(-?([0-9]+)?[.][0-9]+))$Length0 <= length <= 32

selectedbooleanRequired

addressobject<address_portable>Optional

address_portable properties

10 properties

address_line_1stringOptional

The first line of the address, such as number and street, for example, `173 Drury Lane`. Needed for data entry, and Compliance and Risk checks. This field needs to pass the full address.

Match^[\S\s]*$Length0 <= length <= 300

address_line_2stringOptional

The second line of the address, for example, a suite or apartment number.

Match^[\S\s]*$Length0 <= length <= 300

address_line_3stringOptional

The third line of the address, if needed. Examples include a street complement for Brazil, direction text, such as `next to Walmart`, or a landmark in an Indian address.

Match^[\S\s]*$Length0 <= length <= 100

admin_area_4stringOptional

The neighborhood, ward, or district. This is smaller than `admin_area_level_3` or `sub_locality`. Value is:

The postal sorting code that is used in Guernsey and many French territories, such as French Guiana.
The fine-grained administrative levels in China.

Match^[\S\s]*$Length0 <= length <= 100

admin_area_3stringOptional

The sub-locality, suburb, neighborhood, or district. This is smaller than `admin_area_level_2`. Value is:

Brazil. Suburb, *bairro*, or neighborhood.
India. Sub-locality or district. Street name information isn't always available, but a sub-locality or district can be a very small area.

Match^[\S\s]*$Length0 <= length <= 100

admin_area_2stringOptional

A city, town, or village. Smaller than `admin_area_level_1`.

Match^[\S\s]*$Length0 <= length <= 120

admin_area_1stringOptional

UK. A county.
US. A state.
Canada. A province.
Japan. A prefecture.
Switzerland. A *kanton*.

Match^[\S\s]*$Length0 <= length <= 300

postal_codestringOptional

The postal code, which is the ZIP code or equivalent. Typically required for countries with a postal code or an equivalent. See [postal code](https://en.wikipedia.org/wiki/Postal_code).

Match^[\S\s]*$Length0 <= length <= 60

country_codestring<country_code>Required

The [2-character ISO 3166-1 code](/api/rest/reference/country-codes/) that identifies the country or region.

Note: The country code for Great Britain is GB and not UK as used in the top-level domain names for that country. Use the `C2` country code for China worldwide for comparable uncontrolled price (CUP) method, bank card, and cross-border transactions.

Match^([A-Z]{2}|C2)$Length2 <= length <= 2

address_detailsobject<Address Details>Optional

Address Details properties

6 properties

street_numberstringOptional

The street number.

Match^[\S\s]*$Length0 <= length <= 100

street_namestringOptional

The street name. Just `Drury` in `Drury Lane`.

Match^[\S\s]*$Length0 <= length <= 100

street_typestringOptional

The street type. For example, avenue, boulevard, road, or expressway.

Match^[\S\s]*$Length0 <= length <= 100

delivery_servicestringOptional

The delivery service. Post office box, bag number, or post office name.

Match^[\S\s]*$Length0 <= length <= 100

building_namestringOptional

A named locations that represents the premise. Usually a building name or number or collection of buildings with a common name or number. For example, Craven House.

Match^[\S\s]*$Length0 <= length <= 100

sub_buildingstringOptional

Match^[\S\s]*$Length0 <= length <= 100

usage_typeenumRequired

The usage type associated with the PayPal payment token.

Allowed values

"MERCHANT"
"PLATFORM"

customer_typeenumOptional

The customer type associated with the PayPal payment token. This is to indicate whether the customer acting on the merchant / platform is either a business or a consumer.

Allowed values

"CONSUMER"Default
"BUSINESS"

permit_multiple_payment_tokensbooleanOptional

Defaultfalse

paypal_wallet_attributes

paypal_wallet_customer properties

phone_with_type properties

phone properties

name properties

vault_paypal_wallet_base properties

shipping_detail properties

name properties

phone properties

shipping_option properties

money properties

address_portable properties

Address Details properties

Back to top

On this page

On this page

paypal_wallet_attributes

paypal_wallet_customer properties

phone_with_type properties

phone properties

name properties

vault_paypal_wallet_base properties

shipping_detail properties

name properties

phone properties

shipping_option properties

money properties

address_portable properties

Address Details properties

Back to top

On this page

paypal_wallet_attributes

paypal_wallet_customer properties

phone_with_type properties

phone properties

name properties

vault_paypal_wallet_base properties

shipping_detail properties

name properties

phone properties

shipping_option properties

money properties

address_portable properties

Address Details properties

Back to top

On this page

On this page

If you accept cookies, we'll use them to improve and customise your experience and enable our partners to show you personalised PayPal ads when you visit other sites. Manage cookies and learn more

paypal_wallet_attributes

paypal_wallet_customer properties

phone_with_type properties

phone properties

name properties

vault_paypal_wallet_base properties

shipping_detail properties

name properties

phone properties

shipping_option properties

money properties

address_portable properties

Address Details properties

Back to top

On this page